1. Kkl 409.1 Windows 10
2. Ross Tech Vag Kkl 409
3. VAG-409.1
4. Nytrngsecure.com › Other › Vag-kkl-8pa58kgDRIVER VAG KKL 409 1 FOR WINDOWS 10 DOWNLOAD
5. Cached
6. Bestpfiles254.weebly.com › Vag-kkl-4091-driverVag Kkl 409.1 Driver Windows 10 - Bestpfiles
7. Kkl 409.1 Software Download

Virtual COM Port Drivers for Ross-Tech USB Interfaces

Older Ross-Tech RS-232 Serial interfaces can be set to power up as 'dumb K-Line pass through' interfaces. This allowed those old Serial interfaces to be compatible with a wide variety of third-party applications which expect a 'K-line pass-through' serial interface. However, our USB interfaces present additional challenges. Early in their development, we found a number of technical advantages to using a 'direct' USB driver which bypasses the Windows Serial drivers entirely. Hence the USB drivers that ship with VCDS do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port.
NOTE: The following applies to our legacy USB interfaces (HEX-USB, KII-USB and HEX-USB+CAN). It does NOT apply to our current HEX-V2 or HEX-NET interfaces. These new interfaces do not use a USB UART chip and cannot be be used for 'dumb K-line pass-through'!

Sep 10, 2020 Kkl Vag Com 409 1 Windows 10 - Kkl Vag Com 409 1 Windows 10. Go test it on a car.:-). Kkl 409.1 Download Free. Depending on what drivers your system already has installed, you may have to 'force' these by telling the wizard not to search, but to let you specify what driver to install, then doing the Have Disk and Browse thing. Plug the USB cable into any USB port, then the software for the cable will be installed automatically and you will see ' your device is ready to use'. Open control panel and search ' device manager' 8. Click device manage, and click 'port', you will see USB TO SERIAL device with 1 COM port number.

• Other Drivers Kkl vag-com 409.1 driver ethernet-driver-windows-10-asrock trust-17003-driver-download usb2sataide cisco-dpc2320-firmware itech-bluecon-u2 laser-pro-ll2-3-driver enter-webcam-driver download-driver-internet bluetooth-peripheral-device-driver-windows-7-lenovo dell-755-pci-serial-port realtek-rtl-8000-series-wireless-lan-driver.
• Hello I can not handle installing the VAG KKL USB cable on Windows 10. If anyone knows what drivers to install so that AlfaOBD and MultiEcuScan programs can connect to this cable for Windowskie 10 then please help.

In order to facilitate the use of third-party applications which expect to communicate with a serial interface, drivers that emulate a COM port are available. However, anyone thinking about using them needs to be aware of the following points:

• We do not offer installation support for these drivers. They should be used only by someone who is competent/comfortable installing (and possible uninstalling) USB drivers on his PC.

• Download gunship battle games for android. We cannot offer any support for third-party software, nor any guarantee that it will work correctly with these drivers. Of course, the same would apply with a serial interface as well.

That said, here some installation notes:

• These drivers are compatible with Windows 2000 and newer. They should work with W2K, XP-32, XP-64, Vista-32 and Vista-64. We do not have any VCP drivers for Windows 98!

• Unzip the contents of the download into a new folder.

• With an interface plugged in, find it in Device Manager, right-click it, and select Update Driver.

• Depending on what drivers your system already has installed, you may have to 'force' these by telling the wizard not to search, but to let you specify what driver to install, then doing the Have Disk and Browse thing.

• There's also the possibility that the Virtual COM Port won't install automatically. We've found no real pattern why it does on some systems and not on others. If it does not, find the interface in Device > Manager. The name should show '.. with VCP'. Open the properties sheet, click the Advanced tab, and make sure Load VCP is checked. Once checked, disconnect and re-connect the interface.

• Once the USB Serial Port is installed, you may need to change the COM Port Number (depending on how high a number the applications supports). Device Manager, Properties sheet for the USB Serial Port, Port Settings tab, Advanced button. The COM Port Number may change if you plug the interface into a different USB port, so I'd recommend always using the same USB port.

• VCDS should continue to work fine with these drivers installed. Leave VCDS set to USB, not a Virtual COM Port!

Assuming you've read and understand all of the above, you can download the 'Virtual COM Port' drivers here:

Home
Products
VCDS
Product Information
Interfaces
TWIN-USBKII-USB HEX-USB+CAN
Virtual COM Port Drivers

(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)

Start by downloading the VAG-COM Driver Pack 1.

Here's how to install on different Windows versions..

Windows Vista, 7, 8, 8.1, 10:

Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Windows XP:

1. Uncompress the file. Double-click on 'Install.exe' to install the drivers.
2. Plug cable into any computer's USB port.
3. 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
4. Select 'Install the software automatically'.
5. After the installation is complete, click 'Finish'.
6. 'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
7. Go through the same steps as explained above to install this second driver.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Troubleshooting: If Drivers Failed To Install:

Installation failed? Download here VAG-COM Driver Pack 2.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this:

Then select the location where you unextracted Driver Pack 2. Let it install.

Go to Control Panel. Brian eno cards oblique strategies pdf files.

Kkl 409.1 Windows 10

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Ross Tech Vag Kkl 409

Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number.

VAG-409.1

If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how..

Cable should be plugged into computer.

1. Start VCDS-Lite software.
2. Click 'Options' button.
3. You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
4. Click the ‘Test’ button.
5. If everything is good, it should display 'Interface Status: Found!'.
6. You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!

Nytrngsecure.com › Other › Vag-kkl-8pa58kgDRIVER VAG KKL 409 1 FOR WINDOWS 10 DOWNLOAD

If test is not successful — check the following:

Cached

1. Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
2. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
3. Cable must be plugged into the vehicle with ignition ON.
4. Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
5. Make sure that the driver is installed and configured as explained in Step 1.

• Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
• If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
• If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.

Bestpfiles254.weebly.com › Vag-kkl-4091-driverVag Kkl 409.1 Driver Windows 10 - Bestpfiles

For further information and instructions for troubleshooting, visit the following links:

Kkl 409.1 Software Download

How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable